These products are wide used for electronic computer-room, telecommunication room, TV transmitting station, military commanding station, all kinds of laboratory, office and the place where the pipe and wire are centered the requirement of antistatic is needed.
Raised access floors were specified as a safe, unobtrusive way to deliver power and data cabling to office areas, whilst allowing ready access to those services whenever necessary. The access floor construction was created for the places where easy access to the equipment should be available without interrupting the working process. Whenever office layouts need to change, these underfloor services are easily accessed for re-routing, simply by removing floor panels.
The access floor underlay consisting of the supports (pedestals) of different height, type and strength in combination with stringers. Access floors are made of different materials and with different faced panel. The basic element of the access floor construction is panels mounted on height-adjustable supports.
The access floor panels differ in material, thickness, type of the inner and surface coating. A wide range of combinations makes it possible to use the access floors in different-purpose facilities depending on the current load.
The standard panel dimension is 600mm x 600 mm (or other dimensions according to your requirements). Custom-made panels of nonstandard sizes are available.
The type of the coating is determined according to the design of the facility and its purpose. Thus, for computer halls, wiring closets and laboratories vinyl coating with good conductance is used, for the offices carpeting may be used. More expensive and wear-resistant coatings are ceramic tiles, marble, granite, wood. |
